Make a LMG Screen Shoot
The following discription only true for LMG95/450/500. If you want to
use a LMG310, please read the note
Special case LMG310.
Connect your LMG to your PC (see Connection to the power meter).
To make a screen shoot, access the wished menu, which you want to copy, and
press the button Print/Log on your LMG. For the destination,
you have choose ComA:BMP2PC.
The LMG95 only got a Black/white display, but the settings and dialogs
are the same as shown on the picture above.
The active seriel port and also his status (connected/not connected)
is shown in the status dispaly.
If the LMG is correct appointed, you can make the screen shots by pushing
the Enter button.
Possibly, you geht the advice, that the LMG is still conected with the
interface. In case you got no aktive interface connection, or your LMG is
in remote (REM) status. You can ignore this advice, and push the button
Enter on the LMG again.
If everything is OK, you will see a image from the screen shooted LMG menu
on your PC. If not, please read the hints on the
FAQ side.
In the status line (bar graph), you'll get the information about status quo
of the copy cycle.
You can always cancel the copy cycle, by klicking on the close symbol or the cancel
button of the picture in the status line.